Infrared ceramic honeycomb sintering board

Infrared Ceramic Plate is used in combustion oven, using modern advanced science and technology and selecting high-purity and high-quality cordierite. The gas combustion is occurred inside the holes of the ceramic combustion plate, and the heat energy is radiated high-efficiently in the means of ultra-red rays,

Featured Products

Infrared Ceramic Plate is used in combustion oven, using modern advanced science and technology and selecting high-purity and high-quality cordierite. The gas combustion is occurred inside the holes of the ceramic combustion plate, and the heat energy is radiated high-efficiently in the means of ultra-red rays, avoiding energy loss through visible light. It is used in combustion oven, using modern advanced science and technology and selecting high-purity and high-quality cordierite.

Infrared Ceramic Plate can save 30~50% energy consumption, burn without flame, low noise, reduce the formulation of such harmful gas as CO, NOx, etc by a large margin (more than 70%). It is strong bearing of wind, using safely, uniform radiant burning, good resistance against mechanical and thermal shock under normal operating conditions.

Application: The kitchen burning gas, gas water heater, burn oven, industrial baking equipment, industrial organic waste gas combustion, cabinet heaters, etc

Advantages:
*Outstanding Strength
*Uniform radiant burning
*Excellent thermal shock resistance
*Save up to 30~50% energy cost
*Burn without flame, high burning efficiency, low noise
*Reduce the harmful gas such as CO, NOx, etc more than 90%

BarbecuesGyro Cookers
BroilersPizza Ovens
Convection OvensPressure Fryers
Deep Fat FryersProcess
EvaporatorsRanges
Gas OvensRotisserie Ovens
GriddlesSpace Heaters
Greenhouse CO2Sear Cookers

ItemIndexSpecifications  
MaterialsCordieriteWe can provide you
the product by you desire . 
Water absorption50.4%
Open Porosity61%
Specific gravity0.9-1.10Kg/cm3
Thermal expansion coeffecient1.5-3( × 10-6K-1)
Temperature softening>1280 ° C
Cooking Surface Temperature1000-1200 ° C
CO release≤ 0.006%
NOx release≤ 5ppm

Sample Dimensions (mm)ShapeSquare (LxW)<200 × 140
Thickness8--15
Hole Diameter1.1--1.8
Holes Interval1.649--2.086

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours