Y2O3-ZrO2 Fully Stablized Ceramic Rod
Mission Ceramic supply high quality zirconia rods. .
We have both PSZ (partially stabilized zirocnia) and FSZ (fully stabilized zirconia).
1.ZrO2 Ceramic Rod Technical Data
2.Advantage of Mission Zriconia Ceramic Rod
1).We can provide Y2O3-ZrO2,CaO-ZrO2,MgO-ZrO2.
2).High density ,about 6.0g/cm³.
3).ISO pressing ,tight tolerance.
4).Polished surface and good surface roughness.
About Our Company
Zhengzhou Mission Ceramic Products Co.,Ltd is located in Zhengzhou Advanced Al2O3 Wear Resistant Ceramic RodCity,Henan Province. We have been focused on high quality ceramic products for years. We are providing the following materials.
1.Alumina mainly 95% to 99.7% purity.
2.Zirconia,including FSZ and PSZ, Y2O2-ZrO2,CaO-ZrO2,MgO-ZrO2 available.
3.Silicon Carbide, including SiSIC,ReSiC,NSiC,SSiC.
4.Boron Nitride(BN)
5.Ceramic Fiber products,including board,blanket,and bulk fiber.
6.Heaters,mainly Molybdenum Disilicide(MoSi2) and Silicon Carbide(SiC) heaters.
For different ceramic part,we have different processing method,including Casting,Extruding,Tape Casting,Dry pressing and ISO pressing.
If you are interest in any of our products,please let us know.I believe you will like our products and service.
Zhengzhou Mission Ceramic Products Co., Ltd
No.11 Zhengshang Road, Zhengzhou, Henan, China
Mission Ceramic supply high quality zirconia rods. .
We have both PSZ (partially stabilized zirocnia) and FSZ (fully stabilized zirconia).
1.ZrO2 Ceramic Rod Technical Data
PSZ Ceramic Properties | ||
PROPERTIES | Unit | Zirconia Ceramic |
Al2O3 (ZrO2 )Content | wt% | ≥ 94 |
Density | G /CM3 | 6.00 |
Hardness (HRA) | HRA ≥ | 90 |
Flexural Strength | MPa ≥ | 800 |
Max. use Temperature | ºC | 1000 |
Gas-tightness | Pass | |
Thermal shock Resistance | Pass | |
Coeff. of Thermal exp. | ×10-6/ºC | 10.0 |
Volume Resistivity | Ω·cm 20ºC | 1014 |
Dielectric Strength | KV/mm , DC≥ | 20 |
Acid Resistance | mg/cm2 ≤ | 2.0 |
Alkali Resistance | mg/cm2 ≤ | 0.08 |
Wear ability | g/cm2 ≤ | 0.05 |
Compressive Strength | M Pa ≥ | 2000 |
Tensile Strength | M Pa ≥ | 600 |
Elastic Modulus(Young) | G Pa | 320 |
Thermal Conductivity | W/m·K( 20ºC) | 2.6 |
Y-FSZ Ceramic Properties | ||
Chemical content | ZrO2 | 86 wt% |
Y2O3 | 14 wt% | |
Physical Properties | Melting point | ≥2500ºC |
Max. operating temperature | 2200ºC | |
Color | White | |
Density | 5.8g/cm3 | |
Mechanical properties | Flexural strength | 200MPa |
Young's module | 200GPa | |
Hardness(HRA) | 86 | |
Thermal properties | Thermal expansion coefficient(20ºC) | 8-10X10-6 |
Thermal conductivity | 1-2W/mk | |
Electrical properties | Dielectric constant(1MHz25ºC) | 12 |
Electrical resistivity(25ºC) | 109 |
2.Advantage of Mission Zriconia Ceramic Rod
1).We can provide Y2O3-ZrO2,CaO-ZrO2,MgO-ZrO2.
2).High density ,about 6.0g/cm³.
3).ISO pressing ,tight tolerance.
4).Polished surface and good surface roughness.
About Our Company
Zhengzhou Mission Ceramic Products Co.,Ltd is located in Zhengzhou Advanced Al2O3 Wear Resistant Ceramic RodCity,Henan Province. We have been focused on high quality ceramic products for years. We are providing the following materials.
1.Alumina mainly 95% to 99.7% purity.
2.Zirconia,including FSZ and PSZ, Y2O2-ZrO2,CaO-ZrO2,MgO-ZrO2 available.
3.Silicon Carbide, including SiSIC,ReSiC,NSiC,SSiC.
4.Boron Nitride(BN)
5.Ceramic Fiber products,including board,blanket,and bulk fiber.
6.Heaters,mainly Molybdenum Disilicide(MoSi2) and Silicon Carbide(SiC) heaters.
For different ceramic part,we have different processing method,including Casting,Extruding,Tape Casting,Dry pressing and ISO pressing.
If you are interest in any of our products,please let us know.I believe you will like our products and service.
Zhengzhou Mission Ceramic Products Co., Ltd
No.11 Zhengshang Road, Zhengzhou, Henan, China